Product Categories

Send Inquiry

*
*
Home> Products> Stainless Steel Tube> Stainless Steel U bend Tube> ASTM A213 TP321 U Bend Round Tube

ASTM A213 TP321 U Bend Round Tube

Payment Type: L/C,T/T,D/P,Money Gram,Western Union

Transportation: Ocean,Land,Air

Get Latest Price
    Share:
    Product Attributes Supply Ability & Additional Information
    Product Attributes

    Model No.U Bend Tube

    BrandYUHONG

    TypeSeamless

    CertificationUL

    ApplicationGas Pipe

    Section ShapeRound

    UsageThermal Equipment

    TechniqueCold Rolled

    MaterialStainless Steel

    Product Description

    Size: O.D 5/8 Inch 3/4 Inch 1 Inch 14 BWG 16 BWG 18 BWG 

    ASTM A213/A213M UNS S 32100 TP321 1.4541 Heat Exchanger U Bend Tube For Oil And Gas Application

    Yuhong Group Heat Exchanger U Bend Tube with Pickling & Annealing surface is very popular in boilers and heat exchangers industry, water heater industry, air-conditioning industry etc. This kind of seamless tubes has a very important position in our all products . Yuhong Group start to produce U Bend Heat Exchanger Tube Since 2006, now every year we can supply more than 6000 tons of Stainless Steel U Bend Tubes to 50 countries in the world.


    Chemical Composition

     Grade C(max) Si(max) Mn(max) P(max) S(max) Cr Ni Mo Ti
    TP304/1.4301 0.080 1.00 2.00 0.045 0.030 18.0-20.0 8.0-10.5    
    TP304L/1.4307 0.035 1.00 2.00 0.045 0.030 18.0-20.0 8.0-12.0    
    TP304H/1.4948 0.04-0.10 1.00 2.00 0.045 0.030 18.0-20.0 8.0-12.0    
    TP316/1.4401 0.080 1.00 2.00 0.045 0.030 16.0-18.0 11.0-14.0 2.0-3.0  
    TP316L/1.4404 0.035 1.00 2.00 0.045 0.030 16.0-18.0 10.0-14.0 2.0-3.0  
    TP316Ti/1.4571 0.080 1.00 2.00 0.045 0.030 16.0-18.0 10.0-14.0 2.0-3.0 0.7>5x(C+N)
    TP321/1.4541 0.080 1.00 2.00 0.045 0.030 17.0-19.0 9.0-12.0   0.7>5x(C+N)
    TP317L/1.4449 0.080 1.00 2.00 0.045 0.030 18.0-20.0 11.0-14.0 3.0-4.0  
    TP347H/1.4912 0.04-0.10 1.00 2.00 0.045 0.030 17.0-19.0 9.0-13.0    
    TP309S/1.4833 0.080 1.00 2.00 0.045 0.030 22.0-24.0 12.0-15.0 0.75  
    TP310S/1.4845 0.080 1.00 2.00 0.045 0.030 24.0-26.0 19.0-22.0 0.75  

    Process :

    1 . We use Cold Rolled and Cold Drawn techonology to produce U bend tube 

    2 . U bend tube produce will in accordance with the customer's drawings
    3 . To avoid oxidation, inert gas (Argon) is passed through tubes ID at the required flow rate
    4 . The radius is checked for its OD and wall thinning with the recommended specification
    5 . We'll choose three different positions or as customer's request to make sure of the tubes quality. We'll test mechnical properties and micro-structure tests
    6 . Visual inspection for witness and cracks will be done with Dye Penetrant Test
    7 . Each tube shall be done Eddy current test and Hydrostatic test at the recommended pressure to check for leakage

    QQ20200217115652

    Technical Requirements.

    Straight Tubes Standard Specification For Bending:

    ASME SA 213; ASME SB 163; ASME A789, ASME SA268, ASME SA269, etc.

    Marking: Before Bending By Marking Machine All Over The Tube Length (Bent Section After Heat Treatment Without Marking)

    Note: Marking is also possible After bending on the straight parts of U bend Tube.

    Any extra requirements could be indicated by customers before order comfirmed. 

    Also Yuhong Group will give our customers the most professional technical support as well as after-sales service etc.

     

    The standards of U Bend Heat Exchanger Tube as below:

    - TEMA RCB 2.31 Standard Of The Tubular Exchanger Manufacturers Association

    - ASTM A688/ASME SA688 Standard Specification For Welded Tubes Of Austenitic Corrosion Resistant Steel Grade Designed For Feed Water Boilers.

    - ASTM B163/ASME SA163 Standard Techinical Requirements For Tubes Of Nickel And Nickel Alloy For Condensers And Heat Exchangers.

     

    Customer Specifications.

    Bending Radius: From 1.5*OD(Outside Diameter) To 1500mm

    When Ordering Tubes With Radius less or equal to 1.5*OD, It Is Necessary To Agree Precision Of Geometrics.

    Straight Tubes Maximum Length:(Before Bending): 35000 mm.

    Leg Length: Min 1 Meter, Max. 16500 mm (For Max R=1500mm)

    Note: Other Sizes are available upon agreement between customers and us.

    Heat Treatment: Stress Relieved After U-Bending (Bending Area Plus 300MM For Each Leg).

    Hydrostatic Test After U Bending: Maximum Test Pressure 600 Bar, Soaking 10 Sec. With

    Dematerialized Water. Compressed Air Cleaning After Hydro-Test.

    Packaging: In Strong Transport-Worthy Pre-fumigated wooden boxes of corresponding dimensions for each tube Length, Radius, Diameter, According To PO requirements as well as wrapped In polyethylene films With soft plastic caps on both end of Tube. Yuhong Group as the most manufacturer of U Bend Heat Exchanger Tube in China, we will provide our customers the best & stable packing to avoid any demages during the long distance transportation. All the customers will be satisfied with our products quality & service. 


    Below quality tests will be carried out by us:

    Corrosion Test Conducted only when specially requested by the client
    Chemical Analysis Test done as per required quality standards
    Destructive / Mechanical Testing Tensile | Hardness | Flattening | Flare | Flange
    Reverse-bend and Re. flat tests Carried out in full compliance with relevant standards & ASTM A-450 and A-530 norms, which ensures trouble-free expansion, welding & use at customers end
    Eddy Current Testing Done to detect homogeneities in subsurface by using Digital Flaw-mark Testing System
    Hydrostatic Testing 100% Hydrostatic Testing carried out according to ASTM-A 450 norms for checking tube leakage, and biggest pressure we can support 20Mpa/7s .
    Air Under Pressure Test To check any evidence of air leakage
    Visual Inspection After passivation, every single length of tubes & pipes is subjected to thorough visual inspection by trained staff for detecting surface flaws & other imperfections


    Supplementary Testing : 

    Apart from the above mentioned tests, we also carry out on the manufactured products supplementary testing. The tests conducted under this include:

    • Eddy Current Testing
    • O.P Testing
    • Radiography Testing
    • Corrosion Testing
    • Micro Testing
    • Macro Testing
    • IGC Testing
    • Ultrasonic testing
    • Liquid Penetrate testing


    YUHONG GROUP
     deal with Austenitic Stainless Steel, Nickel Alloy Steel (Hastelloy , Monel, Inconel, Incoloy) seamless and welded pipe and tube already more than 25 years, every year sell more than 80000 tons of steel pipe and tube. Our client already cover more than 45 countries, Like Italy, UK, Gernmany, USA, Canada, Chile, Colombia, Saudi Arabia, Russia, Korea, Singapore, Austrial, Poland, France , ....And our group branch company and factory have been already approved by : ABS, DNV, GL, BV, PED 97/23/EC, AD2000-WO, GOST9941-81, CCS, TS, CNNC, ISO9001-2008, ISO 14001-2004. 

    If you have any inquires, please freely contact me. 

    Email: luis.bao@ steelseamlesstube.com

     

    Packaging & Delivery
    Package Type : Plywood Case /Iron Case/ In Bundles Packing
    Supply Ability & Additional Information

    PackagingPlywood Case /Iron Case/ In Bundles Packing

    TransportationOcean,Land,Air

    Place of OriginChina

    Supply Ability800 Ton / Month

    CertificateABS, GL, DNV, NK, PED, AD2000, GOST 9941

    Payment TypeL/C,T/T,D/P,Money Gram,Western Union

    IncotermFOB,CFR,CIF,EXW,FCA

    GET IN TOUCH

    If you have any questions our products or services,feel free to reach out to us.Provide unique experiences for everyone involved with a brand.we’ve got preferential price and best-quality products for you.

    *
    *
    Home> Products> Stainless Steel Tube> Stainless Steel U bend Tube> ASTM A213 TP321 U Bend Round Tube
    YUHONG HOLDING GROUP is one of the largest Procurement, Engineering & Contracting Group companies in China. Our group branch company and factory have been already approved by : ABS, LR, DNV, GL, BV, CCS, KR, PED 97/23/EC, AD2000-WO, GOST9941-81, CCS, TS, CNNC, ISO9001-2015, ISO 14001, ISO 18001, API 5L , API 5CT , API 6D, And our branch company Zhejiang Yuhongwell Steel Co.Ltd has expanded its field of activities and entered in trade and supply of tubular & flat products in Duxplex and Super Duplex, Stainless Steel, Nickel Base alloy Steel ,Cr-Mo alloy steel , Copper Nickel alloy steel,Carbon Steel for our reputed clients worldwide. These products are widely used in various important sectors like Mining, Energy, Boiler & Heat Exchanger, Petrochemical, Chemical Industry, Food plant, Paper plant, Gas and Fluid Industry etc. YUHONG HOLDING GROUP has gained rich experience in Pipes, Fittings, Flanges, Valves, Structural steel, Coils and Plates in past eight years. In a short span of time, YUHONG brand has marked its global presence in more than 40 countries, like, Korea, USA, Canada, Mexico, Colombia, Bolivia, Chile, Argentina, Brazil, Ecuador, Austria, New Zealand,...
    Copyright © 2024 YUHONG HOLDING GROUP CO.,LIMITED---ZHEJIANG YUHONGWELLSTEEL CO,. LTD All rights reserved. Privacy Policy
    Links:
    Copyright © 2024 YUHONG HOLDING GROUP CO.,LIMITED---ZHEJIANG YUHONGWELLSTEEL CO,. LTD All rights reserved. Privacy Policy
    Links
    Send Inquiry
    *
    *

    We will contact you immediately

    Fill in more information so that we can get in touch with you faster

    Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

    Send