Product categories of Boiler Tube, we are specialized manufacturers from China, Boiler Tube, High Pressure Boiler Tube suppliers/factory, wholesale high-quality products of Stainless Steel Boiler Tube R & D and manufacturing, we have the perfect after-sales service and technical support. Look forward to your cooperation!
Boiler Tube - for pressure equipment, used at higher temperatures Standards and steel grades, Tube sizes acc. to EN, DIN, BS, NF A, UNI, STN, ČSN and PN-H standards, Tube sizes acc. to GOST and TU standards, Tube sizes acc. to ANSI standards, Tube sizes acc. to ASME standards, Precision tube sizes.
Boiler tube is made from heat resisting carbon and low alloyed steels which can withstand the load at high pressure and temperature. Boiler tube is used for parts of energy type equipment such as boilers, steam superheaters, steam pipelines, etc. The tubes are supplied as hot rolled or cold drawn. Specifications, dimensions and the steel grades are shown in a separate overview. Boiler tube dimensions and tolerances
The tube dimensions range from 10.2 mm to 139.7 mm, from 26.9 mm diameter and the wall thickness from 2.6 mm and they supplied as hot rolled. The smaller diameter tubes and the thick wall tubes of larger diameters are supplied as cold drawn and subsequently they are heat treated. The tubes delivery in this condition happens only if there is an agreement upfront at the time of ordering the tubes. Based on an agreement it is possible to deliver boiler tubes with dimensions and tolerances according to the dimensional specifications for precision tubes. The tube dimensions meet the requirements of the following EN 10216-2, DIN 2448, BS 3059-1, BS 3059-2, BS 3602-1, BS 3604-1, NF A 49-211, NF A 49-213, UNI 4991, STN 42 5715, STN 42 5716, ČSN 425715, ČSN 42 5716, GOST 8732, PN-H 74252, ANSI B36.10, ASME B36.10. The detailed dimensional overview is shown in the tables according to EN, DIN, BS, NF A, UNI, STN, ČSN and PN-H standards, GOST standards, TU standards, ANSI standards, ASME standards and standards for precision tubes.
Length of the boiler tube
Diameter (OD) [mm] Wall (WT) [mm] Length (L) [m] OD < 60,3 5 – 6 OD => 60,3 WT < 7,1 5 – 6 or 10 – 14 after an agreement 22,4 WT => 7,1 5 – 6 Types of the length of supplied tubes: (a) random, (b) fixed ± 500 m, (c) exact + 15 / - 0 mm.
Boiler tube straightness
Straightness deviation for the whole length of a tube can not exceed value of 0.0015 x L. In conversion to the 1 meter length it can not exceed 3 mm.
Ends of the boiler tubes
The ends of the tubes are vertical to the longitudinal axis and are without burrs.
Condition of the tubes surface
The tubes condition corresponds to the requirements of appropriate standards, heat treatment to the way of tube manufacturing and chemical composition of steel.
Marking of the tubes and tube bundles
The tubes with the outside diameter up to 51 mm are marked with a label that is attached to the bundle. Larger tubes are marked at least at a one end of a tube by the necessary data.
Surface protection of the boiler tubes
While ordering, it is necessary to agree upon the way and means of temporary protecting the surface of the tubes during transportation and storing. The tubes may be supplied without temporary preservation of the surface, or with the preservation of the surface with an agreed upon preservative.
Packaging of the boiler tubes
The tubes are supplied in packages with a circular or hexagonal diameter with weight of 300 to 3500 kilograms. The tubes are bound with a steel band. It is possible to arrange wrapping to plastic sheet, burlap or to wooden crates.