Contact Now
Please Leave Us A Message
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Product Categories
Send Inquiry
Payment Type: L/C,T/T,D/P,Paypal
Transportation: Ocean,Land,Air
$50
≥1 Kilogram
Model No.: Bright Annealed Tube
Brand: YUHONG
Standard: Astm, Jis, Din
Section Shape: Round
Application: Boiler Pipe, Chemical Fertilizer Pipe, Fluid Pipe
Production Process: Cold Rolled
Tolerance: ±10%
Category: Seamless Steel Pipe
Type: Seamless
Certification: Bsi
Application: Chemical Fertilizer Pipe
Section Shape: Round
Surface Treatment: Polished
Usage: Thermal Equipment
Technique: Cold Drawn
Material: Alloy Steel
Monel 400 UNS N04400 Cold Drawn and Cold Rolled Bright Annealed Seamless Tube 6mm, 10mm etc small out diameter etc, Plain ends For Heat Exchanger etc Thermo Equipments
Detailed Product Description
1.1 This specification covers nominal-wall-thickness welded tubes made from the austenitic steels listed in Table 1, with various grades intended for such use as boiler, superheater, heat exchanger, or condenser tubes.
1.2 Grades TP304H, TP309H, TP309HCb, TP310H, TO310HCb, TP316H, TP321H, TP347H, and TP348H are modifications of Grades TP304, TP309S, TP309Cb, TP310S, TP310Cb, TP316, TP321, TP347, and TP348, and are intended for high-temperature service such as for superheaters and reheaters.
1.3 The tubing sizes and thicknesses usually furnished to this specification are 1/8 in. [3.2 mm] in inside diameter to 5 in. [127 mm] in outside diameter and 0.015 to 0.320 in. [0.4 to 8.1 mm], inclusive, in wall thickness. Tubing having other dimensions may be furnished, provided such tubes comply with all other requirements of this specification.
1.4 Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] in inside diameter or 0.015 in. [0.4 mm] in thickness.
1.5 Optional supplementary requirements are provided and, when one or more of these are desired, each shall be so stated in the order.
1.6 The values stated in either inch-pound units or SI units are to be regarded separately as standard. (A combination of values from the two systems may result in nonconformance with the specification.) The inch-pound units shall apply unless the "M" designation of this specification is specified in the order.
Materials Scope:
Stainless Steel Flange: TP304, TP304L, TP304H, TP316, TP316L, TP316Ti, TP310, TP310S, TP321, TP321H, TP317, TP317L, TP347, TP347H, TP904L etc
Duplex Steel Flange: UNS S31803, 2205, S31254 (254SMO)
Super Duplex Steel Flange: UNS S32750, UNS S32760, UNS S32304, S31500
Nickel Alloy as below
Monel 400 & K500,
Inconel 600, 601, 617, 625, 690, 718, X-750.
Incolloy 800, 800H, 800HT, 825, 925.
Hastelloy C22, C4, C276, S, C2000, G-30, G-35, X, N, B, B-2, B-3.
Dimensional Tolerence
All the dimension in Inch(mm)
| Size OD | Nominal Wall | Outside Diameter | Length | Wall |
| 1/2" (12.7) | 0.065" (1.65)/0.049" (1.25) | +/-0.005 (0.13) | +1/8" (3.18) - 0 | +/-10.0% |
| 3/4" (19.1) | 0.065" (1.65)/0.049" (1.25) | +/-0.005 (0.13) | +1/8" (3.18) - 0 | +/-10.0% |
| 1" (25.4) | 0.065" (1.65)/0.049" (1.25) | +/-0.005 (0.13) | +1/8" (3.18) - 0 | +/-10.0% |
| 1-1/2" (38.1) | 0.065" (1.65)/0.049" (1.25) | +/-0.008" (0.20) | +1/8" (3.18) - 0 | +/-10.0% |
| 2" (50.8) | 0.065" (1.65)/0.049" (1.25) | +/-0.008" (0.20) | +1/8" (3.18) - 0 | +/-10.0% |
| 2-1/2" (63.5) | 0.065" (1.65) | +/-0.010" (0.25) | +1/8" (3.18) - 0 | +/-10.0% |
| 3" (76.2) | 0.065" (1.65) | +/-0.010" (0.25) | +1/8" (3.18) - 0 | +/-10.0% |
| 4" (101.6) | 0.083" (2.11) | +/-0.015" (0.38) | +1/8" (3.18) - 0 | +/-10.0% |
| 6" (152.4) | 0.083" (2.11) | +/-0.030" (0.76) | +1" (25.4) - 0 | +/-10.0% |
| 6" (152.4) | 0.109" (2.77) | +/-0.030" (0.76) | +1" (25.4) - 0 | +/-10.0% |
| 8" (203.2) | 0.109" (2.77) | +0.061" (1.55)/-0.031" (0.79) | +1" (25.4) - 0 | +/-10.0% |
To ensure the highest surface quality in all of our sanitary tubing, Yuhong Group goes beyond the requirements of ASTM A269 and A270 by performing the full battery of ASTM bend and deformation tests required by ASME SA249 as well as additional deformation tests developed by Yuhong Group, combined with specific raw material requirements, Eddy Current testing at the tube mill, and tighter OD and wall tolerances allow Yuhong Group to provide a more consistent superior quality product. Hydrogen bright annealed in line to 1900°F (1040°C) minimum and rapidly quenched.Surface finish is 20 μ-in Ra (0.5 μm) ID maximum, 30 μ-in Ra (0.8 μm) OD maximum surface roughness measured per ASME/ ANSI B46.1 with the profilometer reading at 90 degrees to major polishing pattern. Yuhong Group`s polishing techniques result in surface finishes that lead the industry. All tubing is printed with size, gauge, alloy, ASTM and ASME specifications, heat number and date of manufacturing for full traceability. As a final step in maintaining purity standards, Yuhong Group`s A270 S2 tubing is packaged using protective 2 mil poly sleeving along with air tight plastic end caps. The tubing is then placed in triple wall boxes for maximum protection during shipment. Other packaging is available on request.
YUHONG GROUP deal with Austenitic Stainless Steel, Nickel Alloy Steel (Hastelloy , Monel, Inconel, Incoloy) seamless and welded pipe and tube already more than 25 years, every year sell more than 80000 tons of steel pipe and tube. Our client already cover more than 45 countries, Like Italy, UK, Gernmany, USA, Canada, Chile, Colombia, Saudi Arabia, Russia, Korea, Singapore, Austrial, Poland, France , .... And our group branch company and factory have been already approved by : ABS, DNV, GL, BV, PED 97/23/EC, AD2000-WO, GOST9941-81, CCS, TS, CNNC, ISO9001-2008, ISO 14001-2004.
If you have any inquires, please freely contact me.
Email: luis.bao@ steelseamlesstube.com
| Selling Units | : | Kilogram |
|---|---|---|
| Package Type | : | Plywood Case / Wooden Pallets / Iron Case Packing |
Packaging: Plywood Case / Wooden Pallets / Iron Case Packing
Transportation: Ocean,Land,Air
Place of Origin: China
Supply Ability: 300 Tons / Month
Certificate: ABS, GL, DNV, NK, PED, AD2000, GOST 9941
Port: Shanghai Port
Payment Type: L/C,T/T,D/P,Paypal
Incoterm: FOB,CFR,CIF,EXW,FCA
GET IN TOUCH
If you have any questions our products or services,feel free to reach out to us.Provide unique experiences for everyone involved with a brand.we’ve got preferential price and best-quality products for you.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.