Product Categories

Send Inquiry

*
*
Home> Products> Stainless Steel Tube> Stainless Steel Bright Annealed Tube> ASTM A269 19.05mm 2.11mm Stainless Steel BA Tube

ASTM A269 19.05mm 2.11mm Stainless Steel BA Tube

Payment Type: L/C,T/T,D/P,Paypal,Money Gram

Transportation: Ocean,Land

Get Latest Price
    Share:
    Product Attributes Supply Ability & Additional Information
    Product Attributes

    Model No.Bright Annealed Tube

    BrandYUHONG

    TypeSeamless

    CertificationBSI

    ApplicationGas Pipe

    Section ShapeRound

    Surface TreatmentPolished

    UsageThermal Equipment

    TechniqueCold Drawn

    MaterialStainless Steel

    Product Description

    ASTM A269 19.05mm 2.11mm Stainless Steel BA Tube, Plain ends For Precision Instrument Cold Drawn / Cold Rolled finish

    Detailed Product Description

    ASME SA269/ASTM A269 Stainless Steel Seamless Tubing, Bright annealed, Plain End, TP304, TP304L, TP316, TP316L, TP316H, TP316Ti, TP321, TP321H, TP310, TP310S

    ASTM A269/SA269: Standard Specification for Seamless Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes


    1.1 This specification covers nominal-wall-thickness welded tubes made from the austenitic steels listed in Table 1, with various grades intended for such use as boiler, superheater, heat exchanger, or condenser tubes.
    1.2 Grades TP304H, TP309H, TP309HCb, TP310H, TO310HCb, TP316H, TP321H, TP347H, and TP348H are modifications of Grades TP304, TP309S, TP309Cb, TP310S, TP310Cb, TP316, TP321, TP347, and TP348, and are intended for high-temperature service such as for superheaters and reheaters.
    1.3 The tubing sizes and thicknesses usually furnished to this specification are 1/8 in. [3.2 mm] in inside diameter to 5 in. [127 mm] in outside diameter and 0.015 to 0.320 in. [0.4 to 8.1 mm], inclusive, in wall thickness. Tubing having other dimensions may be furnished, provided such tubes comply with all other requirements of this specification.
    1.4 Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] in inside diameter or 0.015 in. [0.4 mm] in thickness.
    1.5 Optional supplementary requirements are provided and, when one or more of these are desired, each shall be so stated in the order.
    1.6 The values stated in either inch-pound units or SI units are to be regarded separately as standard. (A combination of values from the two systems may result in nonconformance with the specification.) The inch-pound units shall apply unless the "M" designation of this specification is specified in the order. 

    QQ20200403214856

    Material Grade:

    American Standard

    Austenitic Steel:

    TP304,TP304L,TP304H, TP304N, TP310S,TP316,TP316L,TP316Ti,TP316H, TP317,TP317L, TP321, TP321H,TP347, TP347H,904L-

    Duplex Steel :

    S32101,S32205,S31803,S32304,S32750, S32760

    Others:TP405,TP409, TP410, TP430, TP439,...

    Europen Standard

    1.4301,1.4307,1.4948,1.4541,1.4878,1.4550,1.4401,1.4404,1.4571,1.4438, 1.4841,1.4845,1.4539,1.4162, 1.4462, 1.4362, 1.4410, 1.4501

    Russia Standard

    08Х17Т,08Х13,12Х13,12Х17,15Х25Т,04Х18Н10,08Х20Н14С2, 08Х18Н12Б,10Х17Н13М2Т,10Х23Н18,08Х18Н10,08Х18Н10Т, 08Х18Н12Т,08Х17Н15М3Т,12Х18Н10Т,12Х18Н12Т,12Х18Н9, 17Х18Н9, 08Х22Н6Т, 06ХН28МДТ


    Dimensional Tolerence

    All the dimension in Inch(mm)

    Size OD

    Nominal Wall

    Outside Diameter

    Length

    Wall

    1/2" (12.7)

    0.065" (1.65)/0.049" (1.25)

    +/-0.005 (0.13)

    +1/8" (3.18) - 0

    +/-10.0%

    3/4" (19.1)

    0.065" (1.65)/0.049" (1.25)

    +/-0.005 (0.13)

    +1/8" (3.18) - 0

    +/-10.0%

    1" (25.4)

    0.065" (1.65)/0.049" (1.25)

    +/-0.005 (0.13)

    +1/8" (3.18) - 0

    +/-10.0%

    1-1/2" (38.1)

    0.065" (1.65)/0.049" (1.25)

    +/-0.008" (0.20)

    +1/8" (3.18) - 0

    +/-10.0%

    2" (50.8)

    0.065" (1.65)/0.049" (1.25)

    +/-0.008" (0.20)

    +1/8" (3.18) - 0

    +/-10.0%

    2-1/2" (63.5)

    0.065" (1.65)

    +/-0.010" (0.25)

    +1/8" (3.18) - 0

    +/-10.0%

    3" (76.2)

    0.065" (1.65)

    +/-0.010" (0.25)

    +1/8" (3.18) - 0

    +/-10.0%

    4" (101.6)

    0.083" (2.11)

    +/-0.015" (0.38)

    +1/8" (3.18) - 0

    +/-10.0%

    6" (152.4)

    0.083" (2.11)

    +/-0.030" (0.76)

    +1" (25.4) - 0

    +/-10.0%

    6" (152.4)

    0.109" (2.77)

    +/-0.030" (0.76)

    +1" (25.4) - 0

    +/-10.0%

    8" (203.2)

    0.109" (2.77)

    +0.061" (1.55)/-0.031" (0.79)

    +1" (25.4) - 0

    +/-10.0%

    To ensure the highest surface quality in all of our sanitary tubing, Yuhong Group goes beyond the requirements of ASTM A269 and A270 by performing the full battery of ASTM bend and deformation tests required by ASME SA249 as well as additional deformation tests developed by Yuhong Group, combined with specific raw material requirements, Eddy Current testing at the tube mill, and tighter OD and wall tolerances allow Yuhong Group to provide a more consistent superior quality product. Hydrogen bright annealed in line to 1900°F (1040°C) minimum and rapidly quenched.Surface finish is 20 μ-in Ra (0.5 μm) ID maximum, 30 μ-in Ra (0.8 μm) OD maximum surface roughness measured per ASME/ ANSI B46.1 with the profilometer reading at 90 degrees to major polishing pattern. Yuhong Group`s polishing techniques result in surface finishes that lead the industry. All tubing is printed with size, gauge, alloy, ASTM and ASME specifications, heat number and date of manufacturing for full traceability. As a final step in maintaining purity standards, Yuhong Group`s A270 S2 tubing is packaged using protective 2 mil poly sleeving along with air tight plastic end caps. The tubing is then placed in triple wall boxes for maximum protection during shipment. Other packaging is available on request.


    YUHONG GROUP deal with Austenitic Stainless Steel, Nickel Alloy Steel (Hastelloy , Monel, Inconel, Incoloy) seamless and welded pipe and tube already more than 25 years, every year sell more than 80000 tons of steel pipe and tube. Our client already cover more than 45 countries, Like Italy, UK, Gernmany, USA, Canada, Chile, Colombia, Saudi Arabia, Russia, Korea, Singapore, Austrial, Poland, France , .... And our group branch company and factory have been already approved by : ABS, DNV, GL, BV, PED 97/23/EC, AD2000-WO, GOST9941-81, CCS, TS, CNNC, ISO9001-2008, ISO 14001-2004. 

    If you have any inquires, please freely contact me. 

    Email: luis.bao@ steelseamlesstube.com

     

    Packaging & Delivery
    Package Type : Plywood Case / Wooden Pallets / Iron Case Packing
    Supply Ability & Additional Information

    PackagingPlywood Case / Wooden Pallets / Iron Case Packing

    TransportationOcean,Land

    Place of OriginChina

    Supply Ability300 Tons / Month

    CertificateABS, GL, DNV, NK, PED, AD2000, GOST 9941

    Payment TypeL/C,T/T,D/P,Paypal,Money Gram

    IncotermFOB,CFR,CIF,EXW,FCA

    GET IN TOUCH

    If you have any questions our products or services,feel free to reach out to us.Provide unique experiences for everyone involved with a brand.we’ve got preferential price and best-quality products for you.

    *
    *
    Home> Products> Stainless Steel Tube> Stainless Steel Bright Annealed Tube> ASTM A269 19.05mm 2.11mm Stainless Steel BA Tube
    YUHONG HOLDING GROUP is one of the largest Procurement, Engineering & Contracting Group companies in China. Our group branch company and factory have been already approved by : ABS, LR, DNV, GL, BV, CCS, KR, PED 97/23/EC, AD2000-WO, GOST9941-81, CCS, TS, CNNC, ISO9001-2015, ISO 14001, ISO 18001, API 5L , API 5CT , API 6D, And our branch company Zhejiang Yuhongwell Steel Co.Ltd has expanded its field of activities and entered in trade and supply of tubular & flat products in Duxplex and Super Duplex, Stainless Steel, Nickel Base alloy Steel ,Cr-Mo alloy steel , Copper Nickel alloy steel,Carbon Steel for our reputed clients worldwide. These products are widely used in various important sectors like Mining, Energy, Boiler & Heat Exchanger, Petrochemical, Chemical Industry, Food plant, Paper plant, Gas and Fluid Industry etc. YUHONG HOLDING GROUP has gained rich experience in Pipes, Fittings, Flanges, Valves, Structural steel, Coils and Plates in past eight years. In a short span of time, YUHONG brand has marked its global presence in more than 40 countries, like, Korea, USA, Canada, Mexico, Colombia, Bolivia, Chile, Argentina, Brazil, Ecuador, Austria, New Zealand,...
    Copyright © 2024 YUHONG HOLDING GROUP CO.,LIMITED---ZHEJIANG YUHONGWELLSTEEL CO,. LTD All rights reserved. Privacy Policy
    Links:
    Copyright © 2024 YUHONG HOLDING GROUP CO.,LIMITED---ZHEJIANG YUHONGWELLSTEEL CO,. LTD All rights reserved. Privacy Policy
    Links
    Send Inquiry
    *
    *

    We will contact you immediately

    Fill in more information so that we can get in touch with you faster

    Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

    Send