Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Product Categories
Send Inquiry
Payment Type: T/T,L/C,Western Union
Transportation: Ocean,Land,Air
Model No.: Butt weld fittings SB366 Inconel800
Brand: YUHONG
Butt weld fittings SB366 Inconel 800h, Inconel 825, Inconel 718, Elbow,Tee, Reduce, Cap
Incoloy 800H/AT is an austenitic heat resistant alloy designed for high temperature structural applications. The strength of 800H/AT is achieved by controlled levels of carbon, aluminum and titanium along with a 2100°F minimum anneal to achieve a grain size of ASTM 5 or coarser.
800H/AT is commonly welded using RA82 (ERNiCr-3) bare wire for applications under 1450°F. RA330-04 (N08334) bare wire offers a closer match of thermal expansion coefficient, and somewhat higher strength. For maximum strength alloy 617 (ERNiCrCoMo-1) bare wire or 117 (ENiCrCoMo-1) covered electrodes are suggested. To avoid possible stress relaxation grain boundary cracking of N08811 in applications above 1000°F the welded fabrication may be heated 1650°F for about one hour per inch of thickness or 30 minutes minimum then air cooled.
Chemistry
Cr | Ni | Mn | Si | Al | Ti | Al +Ti | C | Cu | P | S | Fe | |
MIN | 19.0 | 30.0 | - | - | 0.15 | 0.15 | 0.85 | 0.06 | - | - | - | 39.5 |
MAX | 23.0 | 35.0 | 1.5 | 1.0 | 0.6 | 0.6 | 1.2 | 0.1 | 0.75 | 0.045 | 0.015 | - |
Specifications
ASME SB 407 Code Case 1325, ASME SB 408, ASME SB 409
ASTM B 407, ASTM B 408, ASTM B 409
UNS N08810, UNS N08811
W. Nr./EN 1.4958, W. Nr./EN 1.4959
Inventory
800H/AT Coil, 800H/AT Plate, 800H/AT Sheet, 800H/AT Welding Products
Common Trade Names
800H, Incoloy® 800, Alloy 800
Features
· High design stresses for ASME Section VIII applications to 1650°F
· Useful oxidation resistance through 1800°F
· Resistant to chloride ion stress corrosion cracking
Applications
· Nitric acid catalyst supports
· Reformer outlet pigtails and manifolds
· Heat exchangers
· Pressure vessels
· Dampers
Physical Properties
Density: 0.287 lb/in3
Melting Point: 2475 - 2525°F
Temperature, °F | 70 | 1400 | 1600 | 1800 |
Coefficient* of Thermal Expansion, in/in°F x 10-6 | - | 9.9 | 10.2 | - |
Thermal Conductivity Btu • ft/ft2 • hr • °F | 6.7 | 13.8 | 15.1 | 17.8 |
Modulus of Elasticity, Dynamic psi x 106 | 28.5 | 21.1 | 19.2 | - |
* 70°F to indicated temperature.
Mechanical Properties
Representative Tensile Properties
Temperature,°F | 70 | 1000 | 1200 | 1400 | 1600 | 1800 |
Ultimate Tensile Strength, ksi | 77 | 63.5 | 55.7 | 32.3 | 18.6 | 10.2 |
0.2% Yield Strength, ksi | 29 | 16.5 | 14.8 | 14.4 | 11.6 | 8.9 |
Elongation, % | 52 | 51 | 50 | 78 | 120 | 120 |
Typical Creep- Rupture Properties
Temperature, °F | 1400 | 1600 | 1800 |
Minimum Creep 0.0001%/Hour, ksi | 6.0 | 3.6 | 1.05 |
10,000 Hour Rupture Strength, ksi | 7.3 | 3.5 | 1.2 |
Grade | UNS | W.Nr. | Trade Name |
Inconel 600 | N06600 | 2.4816 | Inconel 600®, Nickelvac® 600, Ferrochronin® 600 |
Inconel 601 | N06601 | 2.4851 | Inconel 601®, Pyromet® 601, Nicrofer® 601 |
Inconel 617® | N06617 | 2.4663 | Inconel 617®, Nicrofer® 617 |
Inconel 625 | N06625 | 2.4856 | Inconel 625®, Chornin® 625, Altemp® 625, Nickelvac® 625, Haynes® 625 Nicrofer® 6020 |
Inconel | N07718 | 2.4668 | Inconel 718®, Nicrofer® 5219, Alvac® 718, Haynes® 718, Altemp® 718 |
Inconel X 750 | N07750 | 2.4669 | Inconel X750®, Haynes X750®, Pyromet® X750, Nickelvac®X750, Nicorros® 7016 |
Incoloy 800 | N08800 | 1.4876 | Incoloy 800®, Ferrochronin® 800, Nickelvac® 800, Nicrofer® 3220 |
Incoloy 800H | N08810 | 1.4876 | Incoloy 800H®, Ferrochronin® 800, Nickelvac® 800, Nicrofer® 3220 |
Incoloy 800HT | N08811 | 1.4876 | Incoloy 800HT®, Ferrochronin® 800, Nickelvac® 800, Nicrofer® 3220 |
Incoloy 825 | N08825 | 2.4858 | Incoloy 825®, Nickelvac® 825, Nicrofer 4241® |
Selling Units | : | Piece/Pieces |
---|---|---|
Package Type | : | Ply-wooden Case /Iron Case Packing |
Packaging: Ply-wooden Case /Iron Case Packing
Productivity: 1500 Tons Per Month
Transportation: Ocean,Land,Air
Place of Origin: CHINA
Certificate: ABS, GL, DNV, NK, PED, AD2000, GOST9941-81, CCS, ISO 9001-2008
Payment Type: T/T,L/C,Western Union
GET IN TOUCH
If you have any questions our products or services,feel free to reach out to us.Provide unique experiences for everyone involved with a brand.we’ve got preferential price and best-quality products for you.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.