Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Product Categories
Send Inquiry
Payment Type: L/C,T/T
Transportation: Ocean,Land,Air
Model No.: ASTM B111/ ASME SB111 C71500
Brand: YuHong Group
Standard: Astm
Section Shape: Round
Application: Oil Pipe, Gas Pipe
Whether Alloy: Is Alloy
Category: Seamless Steel Pipe
Standard: ASTM B111/ ASME SB111
Material: C71500
NDT: Eddy Current Test , Hydrostatic Test , Ultrasonic Test
Application: Desalination Plants/Ship Building & Ship Repai/High Capacity Power Plantsrs
Length: Single Random Length, Double Random Length Or As Customer's Actual Request
Type: Seammless
ASTM B111 C71500 Cooper Nickel Alloy Seamless Tube
C71500 (CuNi30Mn1Fe) Copper Nickel 70/30 Tubes -ASTM B111
ASTM B111 C71500 Copper Nickel Tube is the best resistance of any of the copper alloys to impingement attack and to corrosion from most acids and waters. It is being used in severe corrosive conditions in which service lives longer than those of other copper alloys are desired.
C68700 ASTM B 111/B 111M establishes the requirements for seamless tube and ferrule stock of copper and various copper alloys up to 3 Vs in. [80 mm] inclusive, in diameter, for use in surface condensers, evaporators, and heat exchangers.
Copper or Copper Alloy UNS NO. | Description |
C70600 | 90-10 Copper-Nickel |
C71500 | 70-30 Copper-Nickel |
Standard: ASTM B 111/B 111M
Description Name: ASTM B111 copper tubes, C71500 copper tubes, C71500 Copper-Nickel tubes and pipes, CuNi30Mn1Fe Copper Nickel tubes.
Size: 4mm to 90 mm
Wall Thickness: 0.5 to 10mm
Shape: Round
Length: Single random length/ Double random length or as customer’s actual request
Grade: C70600, C71500, C71640
Designation Chemical Composition % Cu Sn Al As Ni Fe Mn Pb max. Zn C44300 70.0-73.0 0.9-1.2 – 0.02-0.06 – 0.06 max – 0.07 Rem C68700 76.0-79.0 – 1.8-2.5 0.02-0.06 – 0.06 max – 0.07 Rem C70400 Rem – – – 4.8-6.2 1.3-1.7 0.3-0.8 0.05 1.0max C70600 Rem – – – 9.0-11.0 1.0-1.8 1.0max 0.05 1.0max C71500 Rem – – – 29.0-33.0 0.4-1.0 1.0max 0.05 1.0max C71640 Rem – – – 29.0-32.0 1.7-2.3 1.5-2.5 0.05 1.0max Tensile Requirements: Copper or Copper Alloy UNS NO. Temper Designation Tensile Strength Yield Strength Standard Former min ksi min ksi C44300 O61 annealed 45 15 C68700 O61 annealed 50 18 C70400 H55 light-drawn 38 30 C70600 H55 light-drawn 45 15 C71500 O61 annealed 52 18 C71640 O61 annealed 63 25
· C71500 (CuNi30Mn1Fe) Copper Nickel Tube specimens selected for test shall withstand the expansion shown in standard when expanded in accordance with Test Method B 153. The expanded tube shall show no cracking or rupture visible to the unaided eye.
· Hard-drawn tubes not end annealed are not subject to this test. When tubes are specified end annealed, this test is required and shall be performed on the annealed ends of the sampled tubes.
· Tubes for ferrule stock are not subject to the expansion test.
Flattening Test · Test Method: Each test specimen shall be flattened in a press at three (3) places along the length, each new place to be rotated on its axis approximately one third turn from the last flattened area. Each flattened area shall be at least 2 in. in length. A flattened test-specimen shall allow a micrometer caliper set at three (3) times the wall thickness to pass freely over the flattened area. The flattened areas of the test specimen shall be inspected for surface defects. · During inspection, the flattened areas of the test- specimen shall be free of defects, but blemishes of a nature that do not interfere with the intended application are acceptable. · Tubes for ferrule stock are not subject to flattening test. Residual Stress Test · A residual stress test is required to be performed only for Copper Alloy UNS Nos. C70600, C71500, C71640. · Unless otherwise specified, the producer shall have the option of testing the product to either the mercurous nitrate test, Test Method B 154, or the ammonia vapor test, Test Method B 858, as prescribed below. Nondestructive Testing Eddy-Current Test—Each C71500 (CuNi30Mn1Fe) Copper Nickel tube shall be passed through an eddy-current testing unit adjusted to provide information on the suitability of the tube for the intended application. Testing shall follow the procedures of Practice E 243. Hydrostatic Test Each Copper Nickel tube shall stand, without showing evidence of leakage, an internal hydrostatic pressure sufficient to subject the material to a fiber stress of 7000 psi [48 MPa] as determined by the following equation for thin hollow cylinders under tension. The tube need not be tested at a hydrostatic pressure of over 1000 psi [7.0 MPa] unless so specified.
Packaging: Ply-wooden Case/ Iron Case/ Bundle with plastic Cap
Productivity: 100 Tons Per Month
Transportation: Ocean,Land,Air
Place of Origin: Chins
Supply Ability: According to Clients' Request
Certificate: ABS, GL, DNV, NK, PED, AD2000, GOST9941-81, CCS, ISO 9001-2008
HS Code: 7411220000
Payment Type: L/C,T/T
Incoterm: FOB,CFR,CIF,EXW
GET IN TOUCH
If you have any questions our products or services,feel free to reach out to us.Provide unique experiences for everyone involved with a brand.we’ve got preferential price and best-quality products for you.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.