Copper Nickel Pipes and Tubes ASTM B111 C70600

Payment Type: L/C,T/T,Western Union

Transportation: Ocean,Land,Air

Get Latest Price

Contact Now

Product Attributes Supply Ability & Additional Information

Product Attributes

Model No.: Copper Nickel Pipes and Tubes ASTM B111 C70600

Brand: YUHONG

Product Description

Detailed Product Description

Copper Nickel Pipes and Tubes | Cupro Nickel Pipes and Tubes
Cupro Nickel Tubes 90/10
This form of cupro nickel tubes produced by Tube Tech possess excellent resistance to corrosion by sea water as well as high resistance to erosion corrosion and air-impingement attack. The addition of iron results in 90/10 performing as good as 70/30 in salt water service heat exchangers. These tubes have good strength and ductility at ordinary temperatures and relatively high strength and other mechanical properties at elevated temperatures.
These cupro nickel tubes are widely used in condensers, coolers and heat exchangers where resistance to corrosion and erosion is paramount, yet maintaining a high thermal conductivity rate. To be used preferably in marine conditions. Forms a protective film which is multi-layered in flowing seawater. Resists marine bifouling.
These cupro nickel tubes are produced in a range of outside diameter, wall thickness various temper conditions to achieve the required mechanical properties and grain size. The mechanical and dimensional characteristics of our products satisfy the most demanding orders that require tight tolerances.
Cupro Nickel Tubes 70/30
Prosaic Steel supplies smooth bore 70/30 cupro nickel tubes of the highest standard, rigorously tested to make sure they are suitable for the exacting requirement of condensers and heat exchangers. These cupro nickel tubes have the highest resistance to stress-corrosion cracking. These tubes are available in a variety of outside diameter, wall thickness and tempers to meet the requirement. Superior dimensional control with specified mechanical properties offers trouble free performance and cost saving.

This form of cupro nickel tube gives the best service life under the most adverse conditions because of improved corrosion resistance and almost insensitive to stress corrosion. These cupro nickel tubes are used in heat exchangers where severe erosion and corrosion have been experienced, especially at elevated temperatures, high velocities and extreme turbulence of the circulating media. These cupro nickel tubes have an important bearing not only on the performance of heat exchangers but also on the cost and delivery cycle time of the condenser and heat exchangers where they are used.

Copper Nickel Pipes and Tubes , Cupro Nickel Pipes and Tubes ASTM B111 C70400 C70600,ASTM B288, ASTM B688 .

Standards
Cupro Nickel Tube90/ 10	Standard	BS2871part3	ASTM B-111	IS 1545	JIS H 3300	NFA 51 102
Cupro Nickel Tube90/ 10	Symbol	CN 102	C 70600	CuNi10Fe1	C7060	CuNi10Fe1Mn
Cupro Nickel Tubes 70/30	Standard	BS2871part3	ASTM B-111	IS 1545	JIS H 3300	NFA 51 102
Cupro Nickel Tubes 70/30	NFA 51 102	CN 107	C 71500	CuNi30Mn1Fe	C 7150	CuNi30Mn1Fe

Dimensional Range
Outer Diameter - 4.00 to 22.00 mm
Wall Thickness - Between 0.15mm and 1.50 mm
Length upto 6 mtrs
End Applications

Heat Exchangers, Oil Coolers, Radiators, High Capacity Power Plants, Ship Building & Ship Repairs, Condensers, Offshore Oil rigs, Distiller Tubes, Evaporators, Ferrules etc.

Cupro Nickel Tubes 90/10 for Heat Exchangers & Condensers

These Cupro Nickel tubes & pipes for Heat Exchangers & Condensers are very important for all Industrial fields. The company has experience in these areas and is able to supply these tubes in accordance with most international standards and special customer requirements.
Cupro Nickel Tubes 90/10 for Automobile Industries

The Move To Copper-Nickel Tubing
Copper had been proved since the early days to have many good attributes. It was easy to bend and had very high corrosion resistance, but there was concern about its low corrosion-fatigue strength. When copper-nickel was introduced, it displayed corrosion resistance similar to copper, higher general strength and better fatigue strength. Good formability allows ease of flaring and bending, and although the metal cost is greater than that of steel alternatives, copper-nickel is very attractive in view of its extra life, trouble-free installation and safety/reliability characteristics.
Properties of Copper-Nickel Brake Tubing
The copper-nickel alloy used for brake tubing typically contains 10% nickel, with iron and manganese additions of 1.4% and 0.8% respectively. The product conforms to ASTM B466 (American Society for Testing and Materials), which specifies dimensions, tensile strength and yield strength. Formability and internal cleanliness conform to specifications SAE J527, ASTM A254 and SMMT C5B (Society of Motor Manufacturers and Traders). Also, the alloy meets the requirements for pressure containment, fabrication and corrosion resistance for ISO 4038 (International Standards Organization) and SAE J1047.

Packaging & Delivery

Selling Units	:	Short Ton
Package Type	:	STRONG PLYWOOD CASE WITH STEEL FRAME

Supply Ability & Additional Information

Packaging: STRONG PLYWOOD CASE WITH STEEL FRAME

Productivity: 500 Tons Per Month

Transportation: Ocean,Land,Air

Place of Origin: CHINA

Certificate: ASTM B111 ASTM B28

Payment Type: L/C,T/T,Western Union

GET IN TOUCH

If you have any questions our products or services,feel free to reach out to us.Provide unique experiences for everyone involved with a brand.we’ve got preferential price and best-quality products for you.

Home> Products> Heat Exchanger Tube> Copper / Copper Alloy Steel Heat Exchanger Tube> Copper Nickel Pipes and Tubes ASTM B111 C70600